$1,549.00 $2,499.00
Protection you can trust. Ultimate peace of mind.
Leaves healthy minerals in (salt softeners take them out). Have softer, healthier skin and hair plus cleaner dishes and clothes. Your pets will love it too!
Works naturally. Softens water without the use of salt or harsh chemicals. It creates zero wastewater. No refills. No harmful discharge into the environment. No electricity.
No backflush means no wastewater which means no drain installation saving you over $1,000. Water in / water out installation means easy to install for a licensed plumber.
No additives or salt replacement. No ongoing operating cost, save hundreds of dollars every year.
Prolong the lifespan and effectiveness of all your household fixtures and appliances – especially the ones that use hot water.
As a secondary benefit, the Salt-free softener will actually reduce and remove the old existing scale from your pipes, fixtures, and appliances. Give your plumbing a deep clean!
The principle behind the way our EnviroSoft Technology works is relatively simple: it changes scaling calcium into non-scaling calcium. Water becomes hard or “scaling” when the calcium and carbonic acid are out of balance. EnviroSoft media helps return hard water chemistry from this state of imbalance towards proper balance – just like in soft water. As nature intended.
In other words, minerals are neutralized so they don’t stick to surfaces, not removed from your water using harmful chemicals.
The EnviroSoft media is made up of inert NSF-certified polymer beads that work in a fluidized bed - meaning the beads move around and bump into each other. The surface of each inert bead looks like a mini-template of organized holes, technically referred to as “nucleation sites”. These sites act as a catalyst to change scaling calcium into nano-sized crystal structures that are able to absorb minerals readily, yet stable enough to not attach themselves to the surfaces of your plumbing or appliances. The calcium crystals eventually release from the templates into the water stream making EnviroSoft self-regenerating – meaning you never have to replace the media.
Nothing is added to the water. Back in the water stream, the calcium crystals become templates (or “seed” crystals) themselves and can perform the same function just like the media. This is especially important with hot-water appliances like your coffee maker or hot water heater because heating water increases its scale potential. However, the seed crystals are able to absorb the calcium that would otherwise form a scale.
So while EnviroSoft does not technically soften the water, it also doesn’t come with the ongoing hassle, expense or eco-issues that salt-softeners create. At the same time, EnviroSoft conditions your water to protect your plumbing and appliances. EnviroSoft also leaves in healthy minerals (softeners do NOT). EnviroSoft is eco-friendly, needs no maintenance, never has to be replaced and is hassle-free and cost-effective. Water as nature intended.
No, that will not. The process as described above does, in fact, leave the natural minerals but also physically alters so that they cannot form scale. In fact, the system helps remove existing scale throughout your water system.
Our system is effective up to 450 ppm of hardness. If your hardness is higher than 450 ppm don’t fret! Call us and we can customize the amount of media to meet your unique needs.
Our systems are designed for average-sized homes with 2.5 bathrooms or less but can be customized. If you have a larger home, well water, specific contaminant concerns, our WQA experts are happy to customize a personalized solution for you.
The Water Softener should be installed and maintained by a licensed, bonded contractor. Here are instructions meant to serve as a basic guide to installation. Note: individual installation needs may vary and should be determined by a licensed, bonded contractor.
No, our salt-free system does not backwash at all. Ever. Easier to install. Easier on the environment and your pocketbook!
Many! First, is you spend ZERO time and ZERO money on ongoing maintenance. No monthly salt to add. No media replacements. Typical annual maintenance costs for a salt-based softener installed in a two to three bath household of four adults is $716 between monthly salt replacement and annual media replacement. Spread over 10 years that is well over $7,000. If you run RO to remove the salt at the tap, then that cost increases. Not to mention the hassle you incur. During the same period, you have no cost and no hassle with the UltraHome Salt-free System. That’s huge!
The UltraHome Salt-free System is more environmentally friendly. You use no power and you will not waste a drop of water by backflushing. You also cannot use an ionizer with a salt-based ion exchange softener without RO and/or special equipment and filters. You can use an ionizer with the UltraHome Salt-free System.
Your water cannot be over 26 grains / 444 ppm of hardness. For installation you need to consider: a place that will not freeze; appropriate space (approximately one square foot of floor space and 5 feet of height) that is near access to the main water inlet into your home. We recommend you use a licensed plumber.
Yes! No problem using any RO. However, unlike salt-based systems that add salt which then has to be removed by RO, customers do not have to use an RO with our UltraHome Salt-free System, because we do not add salt. We recommend you purchase one of our other great products such as an H2 ionizer or the Premium Whole House System to remove other contaminants.
Yes, it will prevent them from forming a hard water scale! There are no negative effects of using our Salt-Free system with any existing appliance in your home. Again if you drink water from your refrigerator we recommend you purchase one of our other great products such as an H2 ionizer or the Premium Whole House System to remove other contaminants.
You get lifetime media, lifetime warranty and a lifetime of savings!
Yes.
No, the system does not remove the healthy minerals so we don’t need to put them back in the water. That is one of the major benefits!
This system does not use power so it’s easier to install, maintain and more eco-friendly.
You need to know your hardness level. We can send you a free hardness test. Request yours here. If you are on a private water supply like a well or catchment system you should have the water analyzed first. If you own your home, you should have a good report. We offer a few testing options including one for hardness. We can help you organize testing and our WQA Experts will analyze your results. We can design/build a custom system to meet any unique need or concern.
The system is engineered to work in water pressure between 20pst to 120psi. It will work in virtually any home’s water pressure.
We use preferred shipping carriers, including but not limited to, FedEx, UPS, DHL, and USPS.
Typical shipping requires 2-10 days.
We work very hard to ensure that we offer the absolute best prices online. If you find another online store that offers a lower price than us within six months of your purchase date please let us know and we will refund your original payment for the difference. We want you to feel confident that you are getting the absolute best price for the product you are ordering. If you find that our own website has a lower price for the same item you have ordered within six months of your purchase date will refund the difference as well.
To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors' website within six months from the date of your order and we will process the credit accordingly.
Our 100% Price Guarantee has some limitations:
Sign up to get the latest on sales, new releases and more …
© 2023 Extreme Wellness Supply
